2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 1430

Test prerequisite

- Coolant temperature< 80锟斤拷 C

- Charger connected(The battery voltage must be higher than 12.5 V.)

- Ignition ON

- Engine not running

- Vehicle stationary

- There is no fault code present for component B11/4 (Coolant temperature sensor).

- The fuses of component M4/7 (Engine and AC electric suction fan with integrated control) are OK.

Actual values:

- Coolant temperature:Warning! Communication with ECU required.

Continue with button F2

2359

The control line to component M4/7 (Engine and AC electric suction fan with integrated control) has Open circuit.

Possible cause:

- Heat management

Affected functions:

- Engine diagnosis

-------------------------------------------------

Test 1: Check component M4/7 (Engine and AC electric suction fan with integrated control).

1. Check component M4/7 (Engine and AC electric suction fan with integrated control).

Test 1.1: Check component M4/7 (Engine and AC electric suction fan with integrated control) by means of actuation.

Test 1.2: Test PWM signal for operating the suction fan.

1.1. Check component M4/7 (Engine and AC electric suction fan with integrated control) by means of actuation.

Check component M4/7 (Engine and AC electric suction fan with integrated control) by means of actuation.

Test prerequisite

- Coolant temperature< 80锟斤拷 C

- Charger connected(The battery voltage must be higher than 12.5 V.)