2010 Cadillac CTS Sedan AWD V6-3.6L Page 795

2010 Cadillac CTS Sedan AWD V6-3.6L Page 795

Diagnostic Fault Information

Circuit/System Description

High pressure fuel is regulated by the high pressure fuel pump actuator, which is a part of the high pressure fuel pump. The high pressure fuel pump

actuator is a solenoid valve. The ECM provides battery voltage on the actuator high control circuit and ground on the actuator low control circuit.

Both circuits are controlled through output drivers within the ECM. When deactivated, both drivers are disabled. When activated, the high control

circuit driver energizes the high pressure fuel pump actuator and the low control circuit driver pulse-width modulates (PWM) the low control circuit

to ground. The ECM monitors the voltage on the circuits to detect a failure.

Conditions for Running the DTC

* The ignition voltage is between 11-18 V.

* The DTCs run continuously within the enabling conditions.

Conditions for Setting the DTC

P0090

* The ECM detects an open circuit in the high pressure fuel pump actuator low control circuit.

* The DTC sets when the above condition is present for 4 s.

P0091

* The ECM detects a short to ground in the high pressure fuel pump actuator low control circuit.

* The DTC sets when the above condition is present for 4 s.

P0092

* The ECM detects a short to voltage in the high pressure fuel pump actuator low control circuit.

* The DTC sets when the above condition is present for 4 s.

P00C8

* The ECM detects an open circuit in the high pressure fuel pump actuator high control circuit.

* The DTC sets when the above condition is present for 4 s.

P00C9

* The ECM detects a short to ground in the high pressure fuel pump actuator high control circuit.

* The DTC sets when the above condition is present for 4 s.

P00CA

* The ECM detects a short to voltage in the high pressure fuel pump actuator high control circuit.

* The DTC sets when the above condition is present for 4 s.

Action Taken When the DTC Sets

* DTCs P0090, P0091, P0092, P00C8, P00C9, and P00CA are Type A DTCs.

* A message center or an indicator displays Reduced Engine Power.

Conditions for Clearing the DTC

DTCs P0090, P0091, P0092, P00C8, P00C9, and P00CA are Type A DTCs.

Reference Information

Schematic Reference

Engine Controls Schematics (LLT) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)Engine Controls Schematics

(LF1) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)

Connector End View Reference

Component Connector End Views (See: Diagrams/Connector Views)

Description and Operation

Fuel System Description (See: Powertrain Management/Computers and Control Systems/Description and Operation/Fuel System Description)

Electrical Information Reference

* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)