2010 Cadillac CTS Sedan AWD V6-3.0L Page 1638

2010 Cadillac CTS Sedan AWD V6-3.0L Page 1638

* The output shaft speed is 0 RPM or greater.

* The TCM must receive a valid torque signal from the ECM.

Conditions for Setting the DTC

P0751

* Commanded gear slip is 200 RPM for 1.1 seconds.

* First gear locked is commanded.

* The closest gear ratio is 4th gear.

P0752

* Gear slip is 200 RPM or greater for 5 seconds.

* Commanded gear is 3rd.

* Transmission has achieved second gear.

Action Taken When the DTC Sets

* DTC P0751 is a Type B DTC.

* DTC P0752 is a Type A DTC.

Conditions for Clearing the DTC

* DTC P0751 is a Type B DTC.

* DTC P0752 is a Type A DTC.

Diagnostic Aids

Before performing a road test, configure and setup the scan tool for snapshot mode. This will allow you to display, monitor, and verify multiple

transmission data parameters at one time, after the road test.

Reference Information

Schematic Reference

Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)

Description and Operation

* Electronic Component Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and

Operation/Electronic Component Description)

* Transmission General Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and

Operation/Transmission General Description)

* Transmission Component and System Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and

Operation/Transmission Component and System Description)

* Park - Engine Running (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Park - Engine

Running)

* Reverse (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Reverse)

* Neutral - Engine Running (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Neutral -

Engine Running)

* Drive Range, First Gear Engine Braking (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and

Operation/Drive Range/First Gear Engine Braking)

* Drive Range, First Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive Range/First

Gear)

* Drive Range, Second Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive

Range/Second Gear)

* Drive Range, Third Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive

Range/Third Gear)

* Drive Range, Third Gear Default (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive

Range/Third Gear Default)

* Drive Range - Fourth Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive

Range/Fourth Gear)

* Drive Range, Fifth Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive

Range/Fifth Gear)

* Drive Range, Fifth Gear Default (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive

Range/Fifth Gear Default)

* Drive Range, Sixth Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive

Range/Sixth Gear)

* Fluid Passages (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Fluid Passages)

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code