YES
The measurement value is OK.Further possible causes of fault
- M3 (Fuel pump)
End of test
NO
The measurement value is not OK.Possible cause and remedy
- N10/2f4 (Fuse 4)
- Test cables
- M3 (Fuel pump)
End of test
1.3.4. Test current consumption of component N10/2kA (Fuel pump relay).
Figure legend
- A -ConnectionTest cable 35-pin socket box
- 001 -Sockets of component N3/10 (ME-SFI [ME] control unit)
- 05 -35-pin socket box
- 050 -126-pin socket box
- 108 -Test cable 266 589 01 63 00
- N3/10 (ME-SFI [ME] control unit)
- II 1-63ConnectionTest cable
- III 64-126ConnectionTest cable
Warning!
- Connection A of test cable 108 may NOT be connected to connection B of the 126-pin socket box (050).
Continue to test with button F2
No comments:
Post a Comment