Saturday, October 3, 2020

2010 Cadillac CTS Sedan AWD V6-3.0L Technical Service Bulletin # 07-08-49-020G Date: 120917

2010 Cadillac CTS Sedan AWD V6-3.0L Technical Service Bulletin # 07-08-49-020G Date: 120917



Instruments - IPC Odometer Programming Method



INFORMATION



Bulletin No.: 07-08-49-020G



Date: September 17, 2012



Subject: IPC Odometer Programming Method Quick Reference Guide



2010 Cadillac CTS Sedan AWD V6-3.0L Page 13



Models:



2003-2013 GM Passenger Cars and Trucks



Attention:



This bulletin applies to vehicles sold in the U.S. and Canada Only.



..........................................................................................................................................................................................................................................



Supercede:



This bulletin is being revised to add the 2012-2013 Captiva Sport and 2013 Orlando (Canada). Please discard Corporate Bulletin Number



07-08-49-020F (Section 08 - Body and Accessories).



..........................................................................................................................................................................................................................................



The purpose of this bulletin is to provide a reference guide to help identify which season odometer programming method to use after replacing the



instrument panel cluster (IPC). The three season odometer programming methods in use today are listed below. In addition, this reference guide



lists the component where the season odometer value is stored. The season odometer value may be stored in the IPC, the driver information center



(DIC) or the integrated body control module (IBCM), also commonly called a body control module (BCM).



Season Odometer Programming Methods in Use Today



1. IPC reprogramming and setup using the service programming system (SPS).



2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC.



3. Tech 2(R) - The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the



IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or



driving the vehicle.



*The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event.



2010 Cadillac CTS Sedan AWD V6-3.0L Page 14



2010 Cadillac CTS Sedan AWD V6-3.0L Page 15



2010 Cadillac CTS Sedan AWD V6-3.0L Page 16

No comments:

Post a Comment