Tuesday, October 20, 2020

2010 Cadillac CTS Sedan AWD V6-3.0L Page 1535

2010 Cadillac CTS Sedan AWD V6-3.0L Page 1535



2. Connect a test lamp between the enable circuit terminal 13 of the fuel pump control module and ground.



3. Ignition ON, command the fuel pump ON and OFF with a scan tool. The test lamp should turn ON and OFF as commanded.



瀚慖f the test lamp remains OFF all the time, test for a short to ground or an open/high resistance on the enable circuit. If circuit/connections



test normal, replace the K20 ECM.



瀚慖f the test lamp remains ON all the time, test for a short to voltage on the enable circuit. If circuit/connections test normal, replace the K20



ECM.



4. Ignition ON, test for 2-3 V on the enable circuit terminal 13 of the fuel pump control module.



瀚慖f not within the specified range, replace the K20 ECM.



5. If all circuits/connections test normal, replace the K27 fuel pump control module.



Repair Instructions



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM or fuel pump control module replacement, setup,



and programming



P0630



DTC P0601-P0604, P0606, P0607, P0610, P062B, P062F, P0630, P16F3, or P2610 (ECM, LF1)



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptors



DTC P0601



- Control Module Read Only Memory Performance



DTC P0602



- Control Module Not Programmed



DTC P0603



- Control Module Long Term Memory Reset



DTC P0604



- Control Module Random Access Memory Performance



DTC P0606



- Control Module Processor Performance



DTC P0607



- Control Module Performance



DTC P0610



- Control Module Vehicle Options Incorrect



DTC P062B



- Control Module Fuel Injector Control Performance



DTC P062F



- Control Module Long Term Memory Performance



DTC P0630



- VIN Not Programmed or Mismatched - Engine Control Module (ECM)



DTC P16F3



- Control Module Redundant Memory Performance

No comments:

Post a Comment