Skip to main content

2010 Cadillac Truck Escalade RWD V8-6.2L Technical Service Bulletin # 06-00-89-031B Date: 110328

2010 Cadillac Truck Escalade RWD V8-6.2L Technical Service Bulletin # 06-00-89-031B Date: 110328

Engine, A/T - Identification Information

INFORMATION

Bulletin No.: 06-00-89-031B

Date: March 28, 2011

Subject: Engine and Automatic Transmission/Transaxle Identification

Models:

2004-2012 GM Passenger Cars and Trucks

Supercede:

This bulletin in being revised to add the 2012 model year and update the engines listed. Please discard Corporate Bulletin Number 06-00-89-031A

(Section 00 - General Information).

The purpose of this bulletin is to show dealers and retailers how to find engine and automatic transmission/transaxle identification information for

original equipment and remanufactured assemblies.

All original equipment identification information is available in SI. To easily find the information for the vehicle line you are working on, select the

vehicle type and type the word "identification" in the search box. This search (described below) will provide the list of the different assemblies to

choose from.

2010 Cadillac Truck Escalade RWD V8-6.2L Page 201

1. Type in the word "identification" in the search dialog box.

2. The different engine and transmission assemblies available for that vehicle will be displayed. Click the link for the desired engine and/or

transmission identification information.

Remanufactured Engine and Transmission Labeling

All remanufactured transmission labels are in the same location as the original equipment labels and location can be found by using the method

above.

All remanufactured engines have a label on the right or left side of the block. A list is provided below to indicate which side of the block the label

may be found for each engine application.

Right Side of Block

- 2.4L (Quad 4)

- 2.5L

- 2.8L/3.5L/3.7L/4.2L (I4/I5/I6)

- 3.1L/3.4L/3.5L/3.9L (HV V6)

- 3.8L

- 4.3L

2010 Cadillac Truck Escalade RWD V8-6.2L Page 202

- 4.6L (PV8)

- 6.0L/7.4L/8.1L (Big Block)

Left Side of Block

- 2.2L/2.4L (Ecotec)

- 4.8L/5.3L/6.0L/6.2L(Gen III/Gen IV)

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...