2010 Cadillac Truck Escalade RWD V8-6.2L Technical Service Bulletin # 08-08-61-005B Date: 110330

2010 Cadillac Truck Escalade RWD V8-6.2L Technical Service Bulletin # 08-08-61-005B Date: 110330

Body - Front/Rear Fender Liners Warped/Wavy

TECHNICAL

Bulletin No.: 08-08-61-005B

Date: March 30, 2011

Subject: Front and/or Rear Wheelhouse Panel Liner Wavy or Warped (Apply Heat and Reform Wheelhouse Panel Liner)

Models:

2007-2012 Cadillac Escalade, Escalade ESV, Escalade EXT

2007-2012 Chevrolet Avalanche, Silverado, Suburban, Tahoe

2007-2012 GMC Sierra, Sierra Denali, Yukon, Yukon Denali, Yukon XL, Yukon XL Denali

Supercede:

This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 08-08-61-005A (Section 08 - Body and Accessories).

2010 Cadillac Truck Escalade RWD V8-6.2L Page 332

Condition

Some customers may comment that the front or the rear wheelhouse panel liner is warped or wavy.

Correction

Heat and reform the wheelhouse panel liner.

1. Remove the lower wheelhouse panel liner fasteners.

2. Lift the wheelhouse panel liner away from the fender. With a heat gun, apply heat to the area that is warped or wavy.

2010 Cadillac Truck Escalade RWD V8-6.2L Page 333

3. Twist the liner back toward the fender while applying heat. It may take a couple of attempts to work out the warp or waviness in the area.

4. Reinstall the wheelhouse panel liner and fasteners.

Tighten

Tighten the fasteners to 2 Nm (18 lb in).

Warranty Information

For vehicles repaired under warranty, use the table.