Skip to main content

2010 Cadillac Truck Escalade RWD V8-6.2L Technical Service Bulletin # 08-08-44-023A Date: 110523

2010 Cadillac Truck Escalade RWD V8-6.2L Technical Service Bulletin # 08-08-44-023A Date: 110523

Navigation Radio - Problems After Radio/Battery Service

INFORMATION

Bulletin No.: 08-08-44-023A

Date: May 23, 2011

Subject: Information on Navigation Radio Not Displaying Accurate Vehicle Location after Radio Replacement, Power Loss or Battery

Replacement

Models:

2012 and Prior GM Passenger Cars and Trucks

Equipped with Navigation Radio

Supercede:

This bulletin is being revised to update model years. Please discard Corporate Bulletin Number 08-08-44-023 (Section 08 - Body and Accessories).

The purpose of this bulletin is to inform technicians and customers that the Navigation Radio may not display the vehicle location icon on the map

accurately after a radio or battery has been replaced or after battery power has been removed from the radio. The vehicle location icon accuracy

may be degraded if the GPS signal is not available and the GPS displayed icon has a red line through it.

The Navigation Radio does not keep learned GPS information or gyroscope and vehicle speed signals stored when the battery power is removed

from the radio. The Navigation radio continually uses GPS, gyroscope and vehicle speed data to maintain the vehicle location icon positioned

accurately on the displayed map. There may be periods of time during a drive cycle when the GPS signal may not be available and the vehicle

location icon still appears to be accurate. This is due to the radio having internal gyroscopes and receiving a vehicle speed signal to maintain

accuracy if the radio had received a good GPS signal earlier in the drive cycle.

Normal driving will improve the accuracy of the vehicle location icon on the displayed map. It may be necessary for the vehicle to be driven up to

40 km (25 mi) with 15 left and 15 right turns while the vehicle location icon is matched to roads on the displayed map. Do not replace the radio for

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...