Skip to main content

2010 Cadillac Truck Escalade RWD V8-6.2L Technical Service Bulletin # 06-08-44-012F Date: 130228

2010 Cadillac Truck Escalade RWD V8-6.2L Technical Service Bulletin # 06-08-44-012F Date: 130228

Navigation System - DVD Navigation Update Program

INFORMATION

Bulletin No.: 06-08-44-012F

Date: February 28, 2013

Subject: DVD Navigation Update Program, Navigation Disc Diagnostic Aid, AVN Software Update Discs and Ordering Information

Models:

2002-2013 GM Passenger Cars and Trucks

Attention:

Please direct this information to your Sales Consultants, Service Consultants, Parts Personnel and Used Car Department. This bulletin ONLY

applies to North American dealers/retailers.

Supercede:

This bulletin is being revised to include the 2013 model year and update information. Please discard Corporate Bulletin Number 06-08-44-012E

(Section 08 - Body and Accessories).

Navigation System Map Updates

The location information (streets, Points of Interest, etc.) on a vehicle's navigation system ages at a rate of 10%-20% per year. As the map data

becomes out of date, the functionality of the navigation system declines. Offering GM customers new map updates will ensure that the customers

have the latest information for their system.

Map updates can be purchased from the GM Navigation Center in two ways:

- GM Navigation Disc Center 1-877-628-3472

- Via the web through gmnavdisc.com

For information on the most recent map version available for each make/model/year, visit the GM Navigation Center online.

The Nav Disc Center will always have the latest information on map versions and compatibility. Please contact them if you have any questions on

the latest version available for a specific vehicle.

Special Notes on Map Updates

- General Motors offered a Navigation Disc Update Program for 2006 and 2007 model year vehicles. Customers who purchased vehicles with

nav systems were eligible for two free map updates. This program concluded on December 31, 2009. The DVD Navigation Update Program

policy has expired. Communications were sent to 2006 MY and 2007 MY vehicle owners when the program ended, informing them that they

are no longer eligible for free annual updates.

2010 Cadillac Truck Escalade RWD V8-6.2L Page 379

- There is no longer a reduced price offered for warranty discs. Discs required for warranty repairs must be purchased at the retail price. The

maximum allowance for warranty reimbursements has been revised to reflect the change in pricing.

AVN Software Update Discs

Technical Service Bulletins are sometimes generated to address specific navigation radio operational or performance issues. When a navigation

radio bulletin is issued, it may contain instructions to install an advanced vehicle navigation (AVN) software update with a specific part number.

GM dealers must order advanced vehicle navigation (AVN) software update discs from the Nav Disc Center, as directed in the specific bulletin.

AVN software update discs are for the dealer to update the navigation radio software only. They do NOT update or replace the navigation map disc

that is supplied with the vehicle. Please order these parts only as needed. There is a limited supply of these discs available, so dealers may only

order one of a specific part number. Do not order these discs for stock. AVN software update discs can be used to reprogram more than one vehicle.

Software update discs are free of charge; dealers are required to pay for shipping.

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...