4.2 Remove the protective film from the Velcro strips on the control unit and attach the control unit to the side member/right wall of the
luggage compartment. The plug should be facing upward as shown in Figure 6.
5. Install Litronic headlights.
5.1 Transfer the reflectors from the old headlights to the new.
5.2 Coat the side edges of the headlight with soap to ease installation.
5.3 Position Litronic headlights before mounting. Connect the 4-pin plug at the rear of each headlight. Ensure the plug fully engages. Insert
headlights into the body and lock with locking tool.
Note:
If the headlights cannot be locked, or if a high degree of force is necessary to lock the headlights, the basic mounting position of the headlights
must be adjusted.
5.4 Ensure correct seating of the headlights in the body (see Technical Manual, Group 9, Section 94 15 05).
6. Concluding work
6.1 Check fuses A9 and A10 for the left and right dipped beams (low beams). Both fuses must have a 15 amp rating. If 7.5 amp fuses exist
in positions A9 and A10, they must be replaced with 15 amp fuses.
6.2 Connect battery and set clock.
6.3 Perform a function test.
6.4 Install the luggage compartment carpeting, brake booster cover panel, amplifier and CD changer, if equipped.
6.5 Install spare wheel.
6.6 Check headlight adjustment. Adjust if necessary. (Technical Manual, Group 0, pages 03-8 and 03-9).
6.7 Input radio code if necessary.
Technical Service Bulletin # 4/00 Date: 000908
Parking Brake Switch & Convertable Top- Inoperative
Boxster
4/00 610
Binder 6, Body
9-8-00
Parking Brake Switch
Vehicle Type:
Boxster/Boxster S
Model Year:
As of 1997 (V)
Concern:
Parking brake switch inoperative.
Convertible top cannot be opened or closed.
Information:
In some cases, the spring for the electrical contact in the parking brake switch is too low. This could cause the convertible top to stop functioning.
luggage compartment. The plug should be facing upward as shown in Figure 6.
5. Install Litronic headlights.
5.1 Transfer the reflectors from the old headlights to the new.
5.2 Coat the side edges of the headlight with soap to ease installation.
5.3 Position Litronic headlights before mounting. Connect the 4-pin plug at the rear of each headlight. Ensure the plug fully engages. Insert
headlights into the body and lock with locking tool.
Note:
If the headlights cannot be locked, or if a high degree of force is necessary to lock the headlights, the basic mounting position of the headlights
must be adjusted.
5.4 Ensure correct seating of the headlights in the body (see Technical Manual, Group 9, Section 94 15 05).
6. Concluding work
6.1 Check fuses A9 and A10 for the left and right dipped beams (low beams). Both fuses must have a 15 amp rating. If 7.5 amp fuses exist
in positions A9 and A10, they must be replaced with 15 amp fuses.
6.2 Connect battery and set clock.
6.3 Perform a function test.
6.4 Install the luggage compartment carpeting, brake booster cover panel, amplifier and CD changer, if equipped.
6.5 Install spare wheel.
6.6 Check headlight adjustment. Adjust if necessary. (Technical Manual, Group 0, pages 03-8 and 03-9).
6.7 Input radio code if necessary.
Technical Service Bulletin # 4/00 Date: 000908
Parking Brake Switch & Convertable Top- Inoperative
Boxster
4/00 610
Binder 6, Body
9-8-00
Parking Brake Switch
Vehicle Type:
Boxster/Boxster S
Model Year:
As of 1997 (V)
Concern:
Parking brake switch inoperative.
Convertible top cannot be opened or closed.
Information:
In some cases, the spring for the electrical contact in the parking brake switch is too low. This could cause the convertible top to stop functioning.
Comments
Post a Comment