If at least one ignition coil is diagnosed as faulty, the designation (with or without "EM 10", --> Figure 2) must be read off all ignition coils.
Depending on the designation ("EM 10") on the faulty ignition coil, either all ignition coils or a single ignition coil must be replaced, --> see
"Procedure".
Parts Info
Information
The ignition coils with the designation "EM 10" can be ordered now using the parts catalog (PET). There is no additional identification for the new
ignition coils in the PET.
Work Procedure
References:
--> 282019 Removing and installing ignition coil
Depending on the designation ("EM 10") on the faulty ignition coil, either all ignition coils or a single ignition coil must be replaced, --> see
"Procedure".
Parts Info
Information
The ignition coils with the designation "EM 10" can be ordered now using the parts catalog (PET). There is no additional identification for the new
ignition coils in the PET.
Work Procedure
References:
--> 282019 Removing and installing ignition coil
Comments
Post a Comment