Press the upper and lower sections of the side vent together and stick the clips together with a hot glue gun. Ensure that only a little adhesive is
applied, as otherwise noise from chafing is possible (see arrow in figure 7). Stick felt strips over the adhered points in the inner connection area,
which touch the dashboard.
Note:
Introduced 10-01-99 in Production
Complaint:
Noise in area 4 (B) - Clicking and/or crackling noise in the side vents at the top.
Cause:
The upper edge of the upper securing clip is chafing on the installed side vent.
Repair:
Replace old style clip (999 507 533 02), with new style clip (999 507 476 01). The new style clip has narrower contact areas. See figure 8.
Note:
Introduced 10-01-99 in production.
Complaint:
Noise in area 5 - Creaking and/or rattling noises on the panel for passenger's airbag.
Cause:
The contact surface of the dashboard where the passenger rests is rubbing. (Missing or damaged felt strips). Pretension of the panel is too low
against the dashboard opening.
applied, as otherwise noise from chafing is possible (see arrow in figure 7). Stick felt strips over the adhered points in the inner connection area,
which touch the dashboard.
Note:
Introduced 10-01-99 in Production
Complaint:
Noise in area 4 (B) - Clicking and/or crackling noise in the side vents at the top.
Cause:
The upper edge of the upper securing clip is chafing on the installed side vent.
Repair:
Replace old style clip (999 507 533 02), with new style clip (999 507 476 01). The new style clip has narrower contact areas. See figure 8.
Note:
Introduced 10-01-99 in production.
Complaint:
Noise in area 5 - Creaking and/or rattling noises on the panel for passenger's airbag.
Cause:
The contact surface of the dashboard where the passenger rests is rubbing. (Missing or damaged felt strips). Pretension of the panel is too low
against the dashboard opening.
Comments
Post a Comment