Wheel/Tires - New Style Tire Valves SI B36 01 10 Wheels and Tires

Technical Service Bulletin # 360110 Date: 101101
Wheel/Tires - New Style Tire Valves
SI B36 01 10
Wheels and Tires
November 2010
Technical Service
SUBJECT
New Style Tire Valves
MODEL
All
INFORMATION
2010 BMW 328i Sedan (E90) L6-3.0L (N51)   42
The tire valves for use with Tire Pressure Monitor Systems have been redesigned. The new style valves (on the right in the illustration) can be
identified by the smaller/conventional type cap (1) and the tapered seat at the valve's base (3).
^ The sealing washer (indicated by the arrow) is no longer required with the new style valve.
^ The valve has been modified in the area of the rubber seal (3).
^ The only component which is interchangeable between the two valves is the valve cap (1). When replacing a tire valve, the old cap can be reused,
if necessary, to ensure that all the tire valves are fitted with matching caps.
^ Always refer to the Repair Manual for proper installation instructions, including tightening torques.
WARRANTY INFORMATION
For information only