Skip to main content

Mercedes Benz Truck G 55K AMG Mercedes2020-2010 Benz Truck G 55K AMG Technical Service Bulletin # 2011030003 Date: 110401

Mercedes Benz Truck G 55K AMG Mercedes2020-2010 Benz Truck G 55K AMG Technical Service Bulletin # 2011030003 Date: 110401



Campaign - Replace Left Rear Window Regulator



FILE:



SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER



PARTS: GROUP I OF INFORMATION _ PARTS & ACCESSORIES BINDER



Campaign No. 2011030003, April 2011



TO: ALL MERCEDES-BENZ CENTERS



SUBJECT: Model 463, Model Year 2010



Replace Left Rear Window Regulator



This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the drive



cable at the left rear door window lifter may not be to specifications and it is then possible for the cable to detach from its fastenings. Dealers will



replace the left rear window regulator, at the next workshop visit.



Prior to performing this Service Campaign:



^ Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.



^ Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.



Please note that Recall and Service Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.



Approximately 527 vehicles are affected.



Procedure



1. Replace window regulator, refer to WIS: AR72.12-P-1810GN.



Notes (regarding above WIS instructions):



^ Be careful not to damage the plastic inner door liner when removing.



^ Ensure that power window motor gear is properly aligned with window regulator gear when installing window motor to window regulator.



^ Check window for proper adjustment before reinstalling plastic inner door liner.



PRIMARY PARTS INFORMATION



Note:



^ Please be aware that only the part number(s) referenced in the Campaign Bulletin is/are approved for use to repair the vehicle. Repairs performed



using any other part(s) will not have been performed in accordance with the campaign. Accordingly, warranty claims submitted with reference to



an improper part number(s) will be denied.



^ The following allowable labor operation should be used when submitting a warranty claim for this repair:



2010 Mercedes Benz Truck G 55K AMG (463.271) V8-5.5L SC (113.993) 75

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...