Skip to main content

Mercedes Benz Truck G 55K AMG Mercedes2020-2010 Benz Truck G 55K AMG Technical Service Bulletin # LI82-85_P-048031 Date: 090922

Mercedes Benz Truck G 55K AMG Mercedes2020-2010 Benz Truck G 55K AMG Technical Service Bulletin # LI82-85_P-048031 Date: 090922



COMAND(R) - Various Radio Display/Navigation Problems



2010 Mercedes Benz Truck G 55K AMG (463.271) V8-5.5L SC (113.993) 104



COMAND: RADIO STATIONS ARE SHOWN TWICE IN THE DISPLAY, STORED STATIONS ARE OVERWRITTEN, SEVERAL SYSTEM



ERRORS AND NAVIGATION PROBLEMS



Topic Number LI82.85-P-048031



Version 1



Design Group 82.85 Navigation and communication systems (CNS, ICS, COMAND, FleetBoard)



Date 09-22-2009



Validity models 171, 230, 164, 251, 169, 245, 211, 219 and CLC 203 with SA code 512, 527 or 528 and SA code 809 or 800 (NTG2.5



Model 463 with SA code EU1



Reason for change Title, complaint and remedy revised/Supercedes DTB S-B-82.85/679



Reason for block



Complaint:



Radio stations are displayed twice in the COMAND unit (A40/3). Radio stations saved by the customer are sporadically overwritten by other radio



stations.



The COMAND unit sporadically performs a reset while driving. The map in the navigation function freezes....



Cause:



Software error in COMAND head unit (A40/3).



Remedy:



With telematics CD released with DAS 06/09 (A 171 827 40 59), the software of the COMAND unit must be updated to version 02/09.-->We



strongly recommend using DAS 07/09 and later with all of the patches installed.



NOTE:



If the software release of the COMAND unit (A40/3) is 08.08, it is necessary to update the map data. DAS automatically checks and displays the



necessity of updating the map data.



The software update also remedies the following fault profiles:



Bluetooth connection to head unit terminates prematurely or calls are aborted and reconnected



Systems:



- System starts until star appears, performs a reset and then restarts normally



- Cyclic resets with system starting only until star appears



- Random resets during navigation mode



Radio:



- Stations change at random



- The display station name does not match the station being received



- Preset list is overwritten



Navigation:



- Improved TMC behavior, improved route options (avoiding toll roads)



- Improved route options (shortest/quickest/dynamic route)



- Navigation cannot compute a route (automatic continuation of route). The second time the direction is changed, the route is not recalculated. The



blue line disappears. The system announces: :The route cannot b Navigation map freezes e computed - follow the direction arrows". Head unit shows "No route"-



New functions are implemented as of software release 02/09



2010 Mercedes Benz Truck G 55K AMG (463.271) V8-5.5L SC (113.993) 105



- Static guide lines in reversing camera image for model series 164/251



- Implementation of Service call



- Automatic reading of Traffic Message warning messages on the route



- Audio volume reduction for navigation announcements (activatable)



- Level adjustment for AUX signal



- Support for SD cards greater then 2GB



- RDS Radio Text and Radio Text plus



- Blower speed reduction when voice control is active



Software update notes:



^ Battery charger must be connected throughout the update process



^ The head unit may display the message "SOFTWARE MISSING" or may reset a few times during the entire update process: This is



NORMAL! do NOT interrupt the update process



^ Do not disconnect XENTRY/DAS even if you see the software update process bar not moving



^ Do not interrupt the update process unless guided by XENTRY DAS



Symptoms



2010 Mercedes Benz Truck G 55K AMG (463.271) V8-5.5L SC (113.993) 106



Work units



2010 Mercedes Benz Truck G 55K AMG (463.271) V8-5.5L SC (113.993) 107

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...