Skip to main content

2020 -2010 Mercedes Benz Truck G 550 Technical Service Bulletin # LI58-40_P-048536 Date: 091125

2020 -2010 Mercedes Benz Truck G 550 Technical Service Bulletin # LI58-40_P-048536 Date: 091125



Computer/Controls - DAS/XD Add-On 2009-10-21-1288



DAS/XD ADD-ON 2009-10-21-1288 FOR PASSENGER CARS



Topic number LI58.40-P-048536



Version 1



Design group 58.40 Workshop equipment/MB testers



Date 11-25-2009



Validity DVD version 09/2009



Reason for change



Reason for block



Complaint:



Audio or Comand



Model series: 169,245,164,251,171,203,211,219,463



Initial startup cannot be completed with Audio20



ABR



Model series: 216



Control unit programming cannot be performed.



CDI6



Model series: 164, 254



Unknown variant of CDI control unit.



SCR



Model series: 164, 251



Test prerequisites incomplete - Faults during actuations



2010 Mercedes Benz Truck G 550 (463.236) V8-5.5L (273.963) 152



Teleaid



Model series: 164, 211, 221



PRL update nonfunctional



AAC



Model series: 221, 216



Special function for eliminating coding problem after software programming



CDI6BIN5



Model series: 164, 251



Actuation cannot be started



Cause:



For all complaints: XD and DAS diagnostic data.



Remedy:



DAS/XD add-on 2009-10-21-1288 for passenger cars:



This add-on can be installed over DAS/XD version 09/2009.



This add-on does not supersede any other add-ons and must be additionally installed.



Symptoms



2010 Mercedes Benz Truck G 550 (463.236) V8-5.5L (273.963) 153



Control unit/fault code

Comments

Post a Comment

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...
Read more

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...
Post a Comment
Read more

D138， Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...
Post a Comment
Read more