2020 Mercedes Benz Truck ML 63 AMG Technical Service Bulletin # LI58-40_P-048663

2020 Mercedes Benz Truck ML 63 AMG Technical Service Bulletin # LI58-40_P-048663 Date: 091216

Computer/Controls - DAS/XD Add-On 2009-11-18-1311 DAS/XD ADD-ON 2009-11-18-1311 FOR PASSENGER CARS Topic number LI58.40-P-048663 Version 1 Design group 58.40 Workshop equipment/MB testers Date 12-16-2009 Page 211 Validity DVD version 11/2009 Reason for change Reason for block Complaint: SCR Model series: 164, 251 Guided test does not work COMAND Model series: 203, 219, 211, 164, 251, 463, 230, 171, 245, 169 Navigation actual values cannot be displayed. COMAND Model series: 221, 216 Impossible to create a control unit log for telematics. SCR Model series: 164, 251 The SCR is missing from the list of control units. Diesel, transmission CUs Model series: 212 New diesel and transmission control units cannot be commissioned. CU programming: CAN TO errors are logged FSCU212 Model series: 204, 207, 212 Test "Fuel pressure and internal leak tightness" cannot be performed, selection of FSCU in model series 204 DCU-LF, DCU-RF, DCU-LR, DCU-RR Model series: 221 Coding in diagnostics per factory specifications is not possible STH stationary heater with remote control Model series: 221, 216 If fault codes are stored in the fault memory, the following message appears in DAS when the initial startup is performed: "sst file not found". Initial startup is aborted. ETC Model series: 171 Not possible to flash from VGS2 to VGS3 after EHS replacement. ABS traction systems. Model series: 461 Variant coding in control unit variant 0x0001 not possible Cause: For all complaints: XD and DAS diagnostic data. Remedy: DAS/XD add-on 2009-11-18-1318 for passenger cars: This add-on can be installed over DAS/XD version 11/2009. Page 212 This add-on does not supersede any other add-ons and must be additionally installed. Symptoms Page 213 Page 214 Control unit/fault code Validity Page 215