2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 1309

- Power generation

-------------------------------------------------

Test 1: This fault can be ignored and erased.

1. This fault can be ignored and erased.

Note:This fault can be ignored and erased.

2161

This fault can be ignored and erased.

Possible cause:

- This fault can be ignored and erased.

Affected functions:

- Fuel system

-------------------------------------------------

Test 1: This fault can be ignored and erased.

1. This fault can be ignored and erased.

Note:This fault can be ignored and erased.

2165

The idle speed is too high during catalytic converter warm-up.

Possible cause:

- Inspect the intake system of the engine for leaks.

Affected functions:

- Engine output

-------------------------------------------------

Test 1: Inspect the intake system of the engine for leaks.

1. Inspect the intake system of the engine for leaks.

Possible cause of fault

- Unmetered air

Possible remedy

- Check entire air intake system for unmetered air.

End of test

2166

The idle speed is too low during catalytic converter warm-up.

Possible cause:

- M16/6 (Throttle valve actuator)

- Inspect the intake system of the engine for leaks.

Affected functions:

- Engine output

-------------------------------------------------