End of information
1. No further information available.
Part 1
No CAN message was received from control unit N118 (Fuel pump control module). (U0109)
Possible cause:
- Check the CAN communication with control unit N118 (Fuel pump control module).
- Drive train CAN bus
Affected functions:
- CAN Communication
-------------------------------------------------
Test 1: Engine compartment CAN test
Test 2: CAN communication is faulty.
1. Engine compartment CAN test
Test 1.1: Engine compartment CAN test
1.1. Engine compartment CAN test
Test 1.1.1: Procedure in case of CAN faults
Test 1.1.2: Read current CAN configuration and CAN fault codes
Test 1.1.3: Further CAN test options
1.1.1. Procedure in case of CAN faults
No comments:
Post a Comment