2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 219

Test 1.1: Test actuation of component Y49/6 (Left camshaft exhaust solenoid).

Test 1.2: Test current consumption of component Y49/6 (Left camshaft exhaust solenoid).

1.1. Test actuation of component Y49/6 (Left camshaft exhaust solenoid).

Test prerequisite

- Engine at idle

- Vehicle stationary

- Coolant temperature > 80锟斤拷 C

- Time since engine start> 60 s

Status of relevant actual value:

- Temperature of coolant:Warning! Communication with ECU required.

Note

- After the actuation it may be necessary to erase the fault memory!

Proceed to 'Actuation' with F2

1.2. Test current consumption of component Y49/6 (Left camshaft exhaust solenoid).

Figure legend

- A -ConnectionTest cable 35-pin socket box

- 001 -Sockets of component N3/10 (ME-SFI [ME] control unit)

- 05 -35-pin socket box

- 050 -126-pin socket box

- 108 -Test cable 266 589 01 63 00

- N3/10 (ME-SFI [ME] control unit)

- II 1-63ConnectionTest cable

- III 64-126ConnectionTest cable

Warning!

- Connection A of test cable 108 may NOT be connected to connection B of the 126-pin socket box (050).

Continue to test with button F2

Test sequence

- Measure direct current with multimeter between sockets [F.4] 100 and [M.95] 95 of the 126-pole socket box tester.

- Switch on ignition.

Testing of maximum power consumption may be conducted for no longer than 5 s.Specified value

- Amperage[1.0...1.8] A