Test sequence
- Measure direct current with multimeter between sockets [F.4] 100 and [M.54] 54 of the 126-pole socket box tester.
- Switch on ignition.
Specified value
- Amperage[0.6...1.2] A
Question
- Is the measurement value OK?
YES
The measurement value is OK.End of test
NO
The measurement value is not OK.Possible cause and remedy
- N10/1f57 (Fuse 57)
- N10/1kR (Circuit 87 relay, engine)
- Check lines from component N3/10 (ME-SFI [ME] control unit) to component Y110 (Three-disk thermostat valve).
- Y110 (Three-disk thermostat valve)
End of test
0857
B11/4 (Coolant temperature sensor) : Short circuit to ground (P0118)
Possible cause:
- B11/4 (Coolant temperature sensor)
- Y110 (Three-disk thermostat valve)
- The cooling performance of the engine cooling system is poor.
Affected functions:
- Engine cooling
-------------------------------------------------
Test 1: The cooling performance of the engine cooling system is poor.
No comments:
Post a Comment