- If the connector is unplugged at component B2/5b1 (Intake air temperature sensor), value [ -40锟斤拷 C ] is displayed.
- Bridge pin 2 in pin 3 at the unplugged connection of component B2/5b1 (Intake air temperature sensor).The value is approx. [ 150锟斤拷 C ] for a
short period of time and drops back down to the substitute value of approx. [ -40锟斤拷 C ].
Question
- Is the actual value o.k.?
YES
The actual value is okay.Further possible causes of fault
- Check internal resistance of component B2/5b1 (Intake air temperature sensor).
NO
The actual value is not o.k.Possible cause and remedy
No comments:
Post a Comment