Skip to main content

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Technical Service Bulletin # 08-08-42-005B Date: 090618

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Technical Service Bulletin # 08-08-42-005B Date: 090618



Lighting - Headlamp Warranty Replacement Guideline



INFORMATION



Bulletin No.: 08-08-42-005B



Date: June 11, 2009



Subject: Replacement of Headlamp Assemblies Under Warranty and Use of GM vs. Non-GM Headlamp Assemblies



Models:



2010 and Prior GM Passenger Cars and Trucks (Including Saturn and Saab)



2010 and Prior HUMMER H2, H3



Supercede:



This bulletin is being revised to update parts identification and model years. Please discard Corporate Bulletin Number 08-08-42-005A (Section 08



- Body and Accessories).



This bulletin is being issued to inform dealers that whenever a headlamp replacement under warranty is necessary, be sure to use the correct



General Motors (GM) approved headlamp assembly.



Recent Warranty Parts Center reviews of headlamps replaced in the field show that some dealers have returned non-GM (counterfeit) headlamp



assemblies under warranty.



These non-GM headlamp assemblies (referred to as "knock-offs") are not made to GM specifications. Also, the appearance of these headlamp



assemblies are very close to the genuine parts. Refer to the figures below.



The figure above shows a non-GM or "knockoff" headlamp assembly. The lens stamping will read "EAGLE EYES." There are other companies



that manufacture replacement lamps that can be installed on a variety of GM vehicles.



These non-GM headlamp assemblies will not be honored under warranty. These are not original equipment and are not sanctioned as replacement



parts by GM.



2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 217

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...