CLASSIC: 1955 Alloy-based 300 SL Auctioned Off For A Staggering $4.62 Million
4.62 million, a lot more than initially expected. It is no wonder why the client spent so much to have the special 300 SL in his own garage: the car is simply shining. The job done by Rudi Koniczek's team achieved the main target of restoring the classic aura of this icon, with a brilliant, careful attention paid to all the minute details. Read a detailed story about this specific 300 SL after pressing the jump button! If not for US importer Max Hoffman and his passion for a sports coupe based on the highly successful W194 series race cars, the Mercedes-Benz immortal 300 SL line would never have come to production. The racing success of the factory team was having a positive effect on Mercedes-Benz sales in the US. However, without a car clearly related to the race-winning machines, the marketing advantage of the immensely costly racing effort was limited.
Accordingly, Mercedes-Benz management approved the 300 SL project after Mr. Hoffman's firm made a commitment to purchase 1,000 of the cars for US distribution. As a result, the production Gullwing could be ordered with an all-aluminum body. When chosen, many additional competition upgrades followed suit. A competition camshaft was fitted along with stiffer, shorter springs that lowered the car and enhanced peak performance, while racing-specification tires on wider rims promoted better adhesion. Plexiglass windows and vented brake drums were also featured in the package. The cars were nearly 200 pounds lighter than the standard steel-bodied version. In all, just 29 of these aluminum-bodied cars were ordered and built - approximately 2% of the total Gullwing production. Derived for sport, this aluminum Gullwing did not see competitive use. Completed on April 20, 1955, 5500208 was appropriately finished in metallic silver gray over a blue leather interior. The 300 SL was also outfitted with Rudge wheels, the NSL motor and Plexiglas windows per aluminum-build specifications. On May 27, 1955, the Alloy Gullwing was sent to Rotterdam where it was loaded aboard a Holland America Line ship for transport to New York.
Upon arrival, the Mercedes-Benz distributor sent 5500208 to the West Coast for ultimate delivery to Veron Holz of Bonita, California. 57,000 for an unrestored car, which the seller most likely assumed was steel. In need of some attention, the Alloy Gullwing made its way to the well-known restoration shop Hill & Vaughn in Santa Monica, California. Phil Hill and Ken Vaughn had gained a reputation for their high-quality restorations and were frequent winners at the Pebble Beach Concours d'Elegance. Disassembly of the car began in April 1980, and the car is accompanied by a significant file of numerous invoices and photographs documenting the work performed by Hill & Vaughn. The invoices identify the completeness of 5500208, as well as its solid state, which was no doubt a benefit of having spent 25 years in Southern California. Some necessary aluminum work was addressed and the meticulous fitting of the doors, hood and deck lid are thoroughly outlined.
Additionally, the engine and gearbox were sent to AMG Motorbau in Germany for rebuilding. Subsequently returned to Hill & Vaughn in early 1982, the project was nearing completion. By mid-year, the car was ready for paint and assembly. For unknown reasons, Herr Blatzheim requested that 5500208 be packed in a sea container and sent to Germany. The completion of the restoration was conducted in Germany, but not before the body was stripped and prepared again for paint. Photos dated October 1983 show the bare aluminum skin in outstanding condition, proving straight and showing good panel fit. Further photo documentation shows the restoration and assembly of the chassis and completion of the car in silver with gray leather. In May 1984, the 5500208 was sold to Markus Ahr of Germany. During his ownership, work was performed by Daimler-Benz Aktiengesellschaft including a rebuild of the engine. Herr Ahr kept the car well into the 1990s, at which time work was performed by Kienle Automobiltechnik. Photo documentation shows a rebuild of the transmission, rear end, brakes and suspension.
After some serious thought, and perhaps a little family persuasion, the Alloy Gullwing was bought for the collection. In late 2009, Mr. McBride fell ill and the newly acquired Mercedes-Benz took a back seat. At that time, the Gullwing was sent to noted 300 SL restorer Rudi Koniczek at Rudi & Co. for some necessary sorting. Mr. McBride wanted certain aspects of the car corrected, predominantly the shade of silver and the interior. In mid-2011, Mr. Koniczek had finished the restoration but, sadly, Mr. McBride passed away before he could see the final masterpiece. The result was truly spectacular! Shortly after, Mr. McBride's wife Patty and the rest of the McBride family chose to show the Alloy Gullwing at the Kirkland Concours d'Elegance where it rightfully won its class. The finish of the 300 SL is of the highest level and the car retains a very correct appearance. With a livery that is a tasteful yet bold statement, the quality of the work and attention to detail is obvious and further inspection reveals the purity of this Alloy Gullwing.
No comments:
Post a Comment