Skip to main content

Bugatti Chiron Super Sport Set For Geneva 2019 Reveal?

A new rumor claims this is happening.

Bugatti is expanding in its own unique way. Instead of continuously developing a single model like the Veyron for a decade or so, it has already created the Divo to complement the Chiron. The current lineup sits at two models but could be increased to three, if a recent rumor claiming an SUV was in the works is to be believed.

However, The Supercar Blog suggests an alternative third model will arrive in the shape of the Chiron Super Sport at Geneva next March. Sources reportedly told the publication Bugatti is planning an extreme version of the Chiron for a Swiss debut that’s separate from the Divo, which some may have believed to be a more hardcore Chiron.

The rumor further claims sketches of the new model were shown to VIP customers at the Divo’s unveiling last summer at Chateau Saint-Jean, the home of Bugatti founder Ettore Bugatti. The car in question has since been described as “a beauty of speed” and a “Ground-to-ground Missile.”

Details are still a bit unclear at the moment, but it will reportedly be powered by the same 8.0-liter, quad-turbo W16 engine, which really should come as no surprise.

However, Bugatti engineers were instructed to extract every bit of additional horsepower as possible for a new total output exceeding 1,500 hp. Like with the Divo, this new hardcore Chiron (it may not even be called Super Sport) will be built in extremely limited numbers. Think around 20 to 40 examples. A few of those VIP customers have supposedly already placed orders.

So why the sudden expansion at Bugatti? One name: Stephan Winkelmann. Bugatti’s new CEO knows a thing or two about expanding an exclusive brand while maintaining its ultra-elite status. Just look what he did at Lamborghini during his long tenure as its CEO. He briefly held the same position at Audi Sport before moving to Bugatti. The Chiron Sport, revealed last year at Geneva, was only the first vehicle of the Winkelmann era and already we can clearly see his influence. We’ll keep you posted once we find out more.


View the original article here

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...