2010 Cadillac Truck Escalade RWD V8-6.0L Hybrid Page 425
Circuit/System Description
The memory seat module (MSM) monitors the current supplied to the seat adjuster motors. The MSM can detect both absolute and differential
current levels from the motors. Absolute current is the maximum allowable current the module will supply to the motors. A differential current
mismatch occurs when the current supplied to the seat, lumbar and adjustable pedal motors do not match the current returning from the motors.
Conditions for Running the DTC
The MSM establishes that it is not closing to a shorted motor control circuit before the motors are active.
Conditions for Setting the DTC
B1335 00
Current out of the module does not match the current returning to the module within 5 amps.
B1335 0B
The absolute current or an over-current has exceeded the maximum value allowed.
B1335 42
This DTC will set if the module calibration is not programmed.
B1335 4B
This DTC will set if the module calibration is out of range.
Action Taken When the DTC Sets
The adjustable pedal motor and all driver seat adjuster motors are disabled.
Conditions for Clearing the DTC
No comments:
Post a Comment