2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 958
Conditions for Clearing the DTC
* The condition for the DTC is no longer present.
* The EBCM automatically clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles.
Reference Information
Schematic Reference
Antilock Brake System Schematics (See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
ABS Description and Operation (See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Description and Operation/ABS
Description and Operation)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
Scan Tool Reference
Control Module References (See: Testing and Inspection/Programming and Relearning) for Scan Tool Information
Circuit/System Verification
Note: Diagnose any other DTCs before attempting to diagnose C0561.
1. With a scan tool, view the EBCM Signal Data Display.
2. If no invalid signal are present, view Invalid Signal Data in the Enhanced DTC Data.
3. Refer to appropriate module for diagnosing the invalid signal data.
4. Do not replace the EBCM due to this DTC fault.
Antilock Brake System - Non-Hybrid Greater than/Equal to 3900 kg (8600 lb) GVW
DTC C0561
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptor
DTC C0561 71
- System Disabled Information Stored Invalid Serial Data Received
DTC C0561 72
- System Disabled Information Stored Alive Counter Incorrect or not Updated
DTC C0561 74
- System Disabled Information Stored Value of Signal Protection Calculation Incorrect
Circuit/System Description
The electronic brake control module (EBCM) receives messages from other modules over GMLAN which are needed to perform antilock brake
system (ABS), vehicle stability enhancement system (VSES), or traction control system (TCS) functions.
No comments:
Post a Comment