YES
The measurement values are OK.End of test
NO
The measurement values are not OK.Possible cause and remedy
- B2/5b1 (Intake air temperature sensor)
End of test
1600
Plausibility error between signal of temperature sensor in intake pipe and signal of outside temperature sensor (P0071)
Possible cause:
- Ambient temperature values are implausible.
Affected functions:
- Engine diagnosis
-------------------------------------------------
Test 1: Ambient temperature
1. Ambient temperature
Test 1.1: Check component B14 (Ambient temperature display temperature sensor).
Test 1.2: Check component B2/5b1 (Intake air temperature sensor).
1.1. Check component B14 (Ambient temperature display temperature sensor).
Test prerequisites
- The power supply of component N10/1 (Driver-side SAM control unit with fuse and relay module) is OK.
- Fault code 9063 is current, and (or) at least one of the relevant actual values is not OK.
Test sequence
- Detach coupling at component B14 (Ambient temperature display temperature sensor).
- Connect resistance simulator to the connector of component B14 (Ambient temperature display temperature sensor).
- Connect resistance substitution unit between sockets (B14)1 and (B14) 2
- Adjust resistance values one after another and compare them with the actual value.
No comments:
Post a Comment