Warning!Communication with ECU required.
NO
Preconditions
- The fluid level in the automatic transmission is not OK.
Remedy
- Inspect oil level, adjust to correct level if necessary.
NOTE
- Refill oil in automatic transmission up to maximum oil level mark at oil temperature of 80锟斤拷 C.
- (Refer to repair instructions: automatic transmission 722.9)
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 27 001 75Continue with button "F2"
Erase fault memory in control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Additional measures
- Erase fault memory in control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
NOTE
- The fault memory is erased by pressing button "F2".
Continue with button "F2"
Warning!Communication with ECU required.
0735
The gear is implausible or the transmission is slipping. ( 5. gear )
Possible cause:
- Mechanical or hydraulic defect in the transmission ( 5. gear )
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Possible causes and remedial action when fault code 0736 is displayed
1. Possible causes and remedial action when fault code 0736 is displayed
Check oil level in automatic transmission.
No comments:
Post a Comment