- Measure direct current with multimeter between sockets [F.4] 100 and [M.54] 54 of the 126-pole socket box tester.
- Switch on ignition.
Specified value
- Amperage[0.6...1.2] A
Question
- Is the measurement value OK?
YES
The measurement value is OK.End of test
NO
The measurement value is not OK.Possible cause and remedy
- N10/1f57 (Fuse 57)
- N10/1kR (Circuit 87 relay, engine)
- Check lines from component N3/10 (ME-SFI [ME] control unit) to component Y110 (Three-disk thermostat valve).
- Y110 (Three-disk thermostat valve)
End of test
2066
Component B11/4 (Coolant temperature sensor) has a short circuit to positive or an open circuit. (P0118)
Possible cause:
- B11/4 (Coolant temperature sensor)
Affected functions:
- Engine diagnosis
-------------------------------------------------
Test 1: Check component B11/4 (Coolant temperature sensor).
1. Check component B11/4 (Coolant temperature sensor).
Test 1.1: Check component B11/4 (Coolant temperature sensor) using actual value.
Test 1.2: Check signal lines on component B11/4 (Coolant temperature sensor).
Test 1.3: Check internal resistance of component B11/4 (Coolant temperature sensor).
1.1. Check component B11/4 (Coolant temperature sensor) using actual value.
Test prerequisite
- The actual value is not o.k.
Test sequence
- Switch on ignition.
Status of relevant actual value:
- Coolant temperature:Warning! Communication with ECU required.
- Coolant temperature sensor ( Signal voltage ):Warning! Communication with ECU required.
Specified values
- Voltage[20锟斤拷 C]: [3.45...3.32] V
- Voltage[30锟斤拷 C]: [2.93...2.82] V
- Voltage[40锟斤拷 C]: [2.41...2.32] V
- Voltage[50锟斤拷 C]: [1.93...1.86] V
- Voltage[60锟斤拷 C]: [1.51...1.46] V
- Voltage[70锟斤拷 C]: [1.18...1.13] V
- Voltage[80锟斤拷 C]: [0.90...0.87] V
- Voltage[90锟斤拷 C]: [0.70...0.67] V
- Voltage[100锟斤拷 C]: [0.54...0.25] V
- Voltage[110锟斤拷 C]: [0.42...0.40] V
No comments:
Post a Comment