Sunday, July 14, 2019

2020 Subaru Forester P code Page 180

3. ENABLE CONDITION

4. GENERAL DRIVING CYCLE

Always perform the diagnosis continuously.

5. DIAGNOSTIC METHOD

Abnormality Judgment

At the main IC, check the sent signal at each timing which occurs immediately after the tumble generator valve output is set to OFF -> ON,

and judge overcurrent NG when the overcurrent NG signal is sent 96 ms x 10 time(s) in a row.

Time Needed for Diagnosis: 96 ms x 10 time(s)

Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.

Normality Judgment

Judge as OK and clear the NG when the OK signal is sent.

Time Needed for Diagnosis: Less than 1 second

P2016

DTC P2016 INTAKE MANIFOLD RUNNER POSITION SENSOR / SWITCH CIRCUIT LOW (BANK 1)

1. OUTLINE OF DIAGNOSIS

Detect open or short circuit of tumble generator valve position sensor.

Judge as NG if out of specification.

2. COMPONENT DESCRIPTION

No comments:

Post a Comment