Skip to main content

Mercedes-Benz A220 2020 Technical Service Bulletin # S-68_00-81 Date: 100122


Interior - Floor Mat Safety Information



Date: January 22, 2010



Order No.: S-B-68.00/81



Group: 68



SUBJECT: MY-All, Models All



Floor Mat Safety



We are sure you are aware of recent events that have prompted another OEM to issue recalls involving several million vehicles. One of the issues



being focused on by NHTSA is the possibility that the floor mats in these vehicles may interfere with accelerator or brake pedal movement.



Given the critical safety concerns involved, we'd like to take this opportunity to remind our dealers of the proper procedures for installing floor mats



in our vehicles so they may properly communicate this information to our customers:



^ Any existing floor mats should be removed prior to installing new floor mats. Never install floor mats on top of existing floor mats.



^ Floor mats must be secured using the MB floor mat fixation system. We do not recommend using aftermarket floor mats that are not compatible



with this fixation system. For additional information, please refer to the installation instructions included with floor mat sets.



^ Floor mats are model specific. Only install floor mats designed for a specific model and model year. Do not install floor mats if you are unsure of



the model application.



^ Ensure that the driver's mat is installed in the driver's foot area - passenger mat in the passenger foot area.



Mercedes-Benz A220 2020 Page 408



^ Ensure that floor mats are installed correctly - not upside down!



^ Floor mats should be checked periodically for proper fastening and to insure that the floor mat is not interfering with pedal movement.



^ We strongly recommend only using Genuine Mercedes-Benz floor mats. These are the only floor mats approved for use in Mercedes-Benz



vehicles.



^ Only Genuine Mercedes-Benz floor mats utilize the factory-approved fixation system.



Adhering to these recommendations can help to prevent potentially dangerous situations for our customers. This notice applies to both carpet and



all-season floor mats.

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...