Skip to main content

Mercedes-Benz A220 2020 Technical Service Bulletin # LI82-61_P-055955 Date: 130424


Navigation - Becker(R) MAP PILOT Freezes/Slow/Delayed Response



Becker MAP PILOT: Boots only as far as Becker logo, navigation screen freezes, reacts with a delay, TMC unavailable in UK



Topic number L182.61-P-055955



Version 1



Design group 82.61 Auto pilot system (APS), Audio 30 APS



Date 04-24-2013



Validity Model 117, 166, 172, 176, 204, 207, 212, 218, 242, 246



with Becker MAP PILOT (code 509) or preinstallation for



Becker MAP PILOT (code 508)



Reason for change



Complaint:



- The navigation function boots only as far as the Becker logo.



- The display in the navigation function freezes.



- The startup time of the navigation function takes a long time (up to 60 seconds).



- The display responds with a delay when the navigation function is operated.



Attachments



Cause:



Software in navigation module (A2/30).



Mercedes-Benz A220 2020 Page 444



Remedy:



Perform the following software updates in the navigation module (A2/30):



1.) Update interface software (Automotive Software) in navigation module (A2/30) to version 12/21.00 (A 166 902 73 04) or higher using



XENTRY Diagnostics. The software is available as of XENTRY Diagnostics Release 09/12.



2.) Update firmware in navigation module (A2/30) to version R22.3.1205 (available since Week 37/12) or higher using Becker Content Manager.



3.) Update navigation software (PND software) in navigation module (A2/30) to version 2.0.50 (available since Week 37/12) or higher using



Becker Content Manager.



Note:



The updates of the navigation software (PND software) including firmware must be performed using the current Becker Content Manager. The



checks for updates on launching the Becker Content Manager must be activated in the "Settings" menu (see attachment). To update the



navigation software, it may be necessary to perform a free-of-charge update of the map data at the same time. Detailed information can be found



at www.beckermappilot.com. The update process can take up to several hours depending on your Internet connection.



Attachments



Mercedes-Benz A220 2020 Page 445

Labels

Labels:

Comments

Post a Comment

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...
Read more

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...
Post a Comment
Read more

D138， Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...
Post a Comment
Read more