Skip to main content

Ford CP4 Lawsuit Should Be Dismissed, Says Automaker



A Ford CP4 lawsuit alleges the diesel fuel pumps in 6.7-liter Power Stroke vehicles don't function correctly when U.S. diesel is used, making the fuel pumps "ticking time bombs."



But in a motion to dismiss the suit, Ford says the plaintiffs do nothing but try to hold Ford accountable "based on the actions of other car manufacturers."



The proposed class action lawsuit includes all consumers in California who are current or former owners and lessees of 2011-2018 Ford vehicles equipped with Power Stroke 6.7-liter diesel engines.



The fuel pumps were built by Bosch and allegedly are not manufactured for U.S. diesel fuel specifications concerning lubrication and water content. The CP4s allegedly run dry and cause metal to contact metal, shedding metal shavings and sending them through the engines.



Ford owners claim the vehicles suddenly stall once the pumps fail, causing serious safety hazards while driving at highway speeds. Those same owners also allege repairs can cost up to $20,000 out-of-pocket because Ford blames the problems on contaminated diesel fuel.



The automaker allegedly knew the CP4 pumps were no good in the U.S. but decided to conceal the defects to continue selling the trucks and denying warranty repairs.



In its response to the proposed class action lawsuit, Ford told the judge the plaintiffs are trying to sue Ford for alleged defects that never manifested. The automaker says the plaintiffs continually talk about actions of other car manufactures, something that has nothing to do with Ford.




"The problem for Plaintiffs is that their allegations are long on conclusions and short on the facts necessary to establish their fraud, warranty, and other claims." - Attorneys for Ford




Ford says the plaintiffs want to be awarded damages and further want Ford to recall the trucks even though the plaintiffs still drive the vehicles. In addition, Ford argues the plaintiffs never allege the trucks have any particular design or manufacturing defects that stopped the plaintiffs from using the trucks.



The automaker says the lawsuit mentions a few specific things Ford said concerning its vehicles “built to extremely high standards of durability and reliability."



According to the plaintiffs, statements such as that add to the evidence that Ford violated California fraud laws, but Ford says a statement like that is a textbook example of "non-actionable puffery."



Attorneys for Ford further say the plaintiffs provide no reason why the automaker had a duty to disclose an "unmanifested defect" that poses no safety risk. As for warranty claims against Ford, attorneys argue the plaintiffs admit their vehicles remain fit for providing transportation.



Additionally, there are allegedly no facts to suggest Ford didn't honor its obligations while the vehicles were covered by warranties.



Ford also told the judge the plaintiffs claim they deserve damages based on overpaying for the trucks, but a "plaintiff who purchases a car that never malfunctions over its ordinary period of use cannot be said to have received less than what he bargained for when he made the purchase.”



The Ford CP4 lawsuit was filed in the U.S. District Court for the Northern District of California - Farlow, et al., v. Ford Motor Company.



The plaintiffs are represented by Hagens Berman, Hilliard Martinez Gonzales, and Morgan & Morgan.



SOURCE: CarComplaints.comFord CP4 Lawsuit Should Be Dismissed, Says Automaker



CARCOMPLAINTS.COM RSS FEED (https://www.carcomplaints.com/news/feed.xml)
© 2019 Autobeef LLC. RSS Terms of Use: https://www.carcomplaints.com/rss.shtml
Mon Jul 8 10:37:14 2019 | 38.121.82.246 | Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10_5_2; en-gb) AppleWebKit/526+ (KHTML, like Gecko) Version/3.1 iPhone | GET | ZCXVCBASDF

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...