2020 Mercedes Benz Truck ML 350 Technical Service Bulletin # S-91_60-195A Date: 120118
Restraints - Repair And Diag. Of Airbag Wiring Harnesses
Date: January 18, 2012
Order No: S-B-91.60/195a
Supercedes: S-B-91.60/195, January 6, 2012
Group: 91
Revision a: Parts information removed. Reference EPC-net for relevant parts.
SUBJECT: MY-All, Models All
Repair and Diagnosis of Airbag Wiring Harness
When a driver airbag, front-passenger airbag, sidebag or windowbag or an emergency tensioning retractor is triggered, the coupling melts from the
gas generator heat and becomes unusable. Up until now, repair on airbag wiring harnesses was not permitted due to safety reasons and had to be
partly or completely replaced depending on type. As always follow most current part numbers and corresponding information in EPC before
ordering.
NOTE:
The part numbers for the solder connector are available in the EPC under the DG (design group) ...\54\019. The "Repairing wiring harness using
solder connectors" document is to be observed.
Follow WIS AR54.18-P-0600A Repair supplemental restraint system (SRS) squib wiring harness for Models:
Model 124, 126, 129, 140, 163, 164, 166, 168, 169, 170, 171, 172, 197, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221,
230, 240, 245, 246, 251, 414, 461, 463.
Follow WIS AR54.18-P-0600SLR Repair supplemental restraint system (SRS) squib wiring harness for Model: 199.
No comments:
Post a Comment