2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 1257

NO

The measurement values are not OK.Possible cause and remedy

- B11/4 (Coolant temperature sensor)

End of test

2069

Component B14 (Ambient temperature display temperature sensor) has a short circuit to positive. (P0073)

Possible cause:

- B14 (Ambient temperature display temperature sensor)

Affected functions:

- Power generation

-------------------------------------------------

Test 1: Ambient temperature

Test 2: Check component B14 (Ambient temperature display temperature sensor).

1. Ambient temperature

Test 1.1: Check component B14 (Ambient temperature display temperature sensor).

Test 1.2: Check component B2/5b1 (Intake air temperature sensor).

1.1. Check component B14 (Ambient temperature display temperature sensor).

Test prerequisites

- The power supply of component N10/1 (Driver-side SAM control unit with fuse and relay module) is OK.

- Fault code 9063 is current, and (or) at least one of the relevant actual values is not OK.

Test sequence

- Detach coupling at component B14 (Ambient temperature display temperature sensor).

- Connect resistance simulator to the connector of component B14 (Ambient temperature display temperature sensor).

- Connect resistance substitution unit between sockets (B14)1 and (B14) 2

- Adjust resistance values one after another and compare them with the actual value.

Status of relevant actual value:

- B14 (Ambient temperature display temperature sensor):Warning! Communication with ECU required.

Specified value

- Resistor9.6 kohms:Temperature: [0锟斤拷 C]

- Resistor5.9 kohms:Temperature: [10锟斤拷 C]

- Resistor3.7 kohms:Temperature: [20锟斤拷 C]

- Resistor2.4 kohms:Temperature: [30锟斤拷 C]

- Resistor1.6 kohms:Temperature: [40锟斤拷 C]

Question:Is the actual value o.k.?

YES

The actual value is okay.Possible cause and remedy