2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Technical Service Bulletin # TECLTB00118 Date: 080225
Suspension - Revised Lower Front Control Arm Service
No.: LTB00118
Issue: 1
Date: 25 FEB 2008
SECTION: 204
Revised Workshop Procedure: Remove / Install Front Lower Suspension Arm
AFFECTED VEHICLE RANGE:
CONDITION SUMMARY:
Situation:
A revised workshop procedure has been developed for the removal and installation of the front suspension lower arm. The previous procedure
required the removal of the front hub/wheel assembly. The new procedure provides for the displacement of the driveshaft which will provide room
for the arm to be removed.
Action:
When removing / installing the front lower arm assembly, refer to the Repair Procedure outlined below.
PARTS:
No parts required.
WARRANTY:
NOTE:
2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Page 240
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
REMOVING / INSTALLING THE FRONT SUSPENSION LOWER ARM ASSEMBLY
NOTE:
GLOBAL TECHNICAL REFERENCE (GTR) LOOKUP SEQUENCE IS AS FOLLOWS:
GTR HOME> NAS >MODEL> SERVICE INFORMATION > MODEL YEAR > WORKSHOP MANUALS > 2: CHASSIS > 204
SUSPENSION > 204-01: FRONT SUSPENSION - LOWER ARM (60.35.02).
1. Refer to Workshop Manual (GTR) Section 204-01: Front Suspension Lower Arm (60.35.02) for the revised removal / installation instruction.
No comments:
Post a Comment