Skip to main content

Interior/Restraints - Seat Trim Material Information

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Technical Service Bulletin # 00-042B Date: 110215



Interior/Restraints - Seat Trim Material Information



Classification: RS00-003B



Reference: NTB00-042B



Date: February 15, 2011



RECOMMENDATION AGAINST MAKING CHANGES TO FRONT SEAT ASSEMBLY TRIM MATERIALS



This bulletin has been amended. The Applied Vehicles and Service Information have been updated. Discard all previous copies.



APPLIED VEHICLES: ALL NISSAN VEHICLES



SERVICE INFORMATION



Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact



Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death.



Nissan STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically



applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers seat pads or seat storage pouches etc. around or over



the seat back and the passenger seat cushion.



^ Damage or failure due to changes or modifications to the front seat assembly are not covered under the warranty.



2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 204



^ Damage or failure due to changes or modifications to the front seat assembly are not subject to indemnification under the Nissan Dealer Sales and



Service Agreement.



^ Dealers may be obligated under their Nissan Dealer Sales and Service Agreement to indemnify Nissan for any damages, injuries, or deaths caused



by modification of the front seat assemblies.



^ NMAC will not provide retail advance for any changes to the front seat trim materials from factory equipped condition.



^ Vehicles with any changes to the front seat trim materials from factory equipped condition may not be eligible for the Signature PURCHASE



Plan.



SEE Section 1 of the applicable Owner's Manual for important Warnings and other information about Front Seat-Mounted Side-Impact



Supplemental Air Bags and Passenger Occupant Classification Sensor.

Comments

Post a Comment

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...
Read more

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...
Post a Comment
Read more

D138， Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...
Post a Comment
Read more