2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 360

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Technical Service Bulletin # 09-140 Date: 091208

2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 360

A/T - CVT Oil Leak Diagnosis Information

Classification: AT09-012

Reference: NTB09-140

Date: December 8, 2009

CVT OIL LEAK DIAGNOSIS USING FLORESCENT DYE

APPLIED TRANSMISSION: Continuously Variable Transmission (CVT)

SERVICE INFORMATION

If you have a CVT that appears to have oil seepage or a leak on the transmission, follow the steps below to assist in a correct diagnosis.

1. Thoroughly clean off the area of the suspected leak.

2. Install 1 fluid ounce of J-28431 Fluorescent Oil Dye* into the CVT.

3. Drive vehicle for a minimum of 30 minutes (to ensure proper diagnosis).

4. Inspect with lamp from J-43926 A/C Dye Kit*

If no fluorescent oil trace/leak is found, the stain is probably:

^ corrosion protection chemicals sprayed on the transmission

and/or

^ lubricants which are sometimes used to ease the assembly process.

NOTE:

These may cause dust to accumulate (gather) on the transmission and have the appearance of an oil leak. Neither of these requires corrective action.

If a fluorescent oil trace/leak is found:

^ Repair using standard warranty procedures.

*These tools were made Essential in 2001 (J-28431) and 1999 (J-43926). They are also available from Tech Mate.

NOTE:

The Fluorescent Oil Dye is also available from Tech Mate in a pack of six 1 ounce bottles. That pack is available as part number J-28431-6.