2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Technical Service Bulletin # TECLTB00244 Date: 091117
Interior - Cargo Cover Becomes Detached
No: LTB00244
Issue: 1
Date: 17 NOV 2009
SECTION: 501
Loadspace Roller Blind Locating Peg Repair Kit Availability
AFFECTED VEHICLE RANGE:
Range Rover Sport (LS) VIN: 6A900129 - Onwards
Model Year: 2006 - Onwards
CONDITION SUMMARY:
Situation:
A loadspace roller blind locating peg repair kit is now available as a serviceable part. The locating pegs may become detached, thus making the
loadspace blind unable to latch in the fully extended position.
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to replace the loadspace roller blind locating pegs.
PARTS
TOOLS:
Refer to Workshop Manual (GTR) for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
REPLACE LOADSPACE ROLLER BLIND LOCATING PEGS
2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Page 288
1. Remove the loadspace roller blind.
2. Remove the two screws and the two locating pegs.
3. Install two new locating pegs and screws.
4. Install the loadspace roller blind.
5. Verify loadspace roller blind operation.
No comments:
Post a Comment