Monday, February 11, 2019

Mercedes Benz C 43 AMG Technical Service Bulletin # P-42_30-103 Date: 090113

Mercedes Benz C 43 AMG Technical Service Bulletin # P-42_30-103 Date: 090113



Brakes - ABS Pump Runs Continuously/Code C1401 Set



Date: January 13, 2009



Order No.: P-B-42.30/103



Supersedes:



Group: 42



348



SUBJECT:



All Model 202 Vehicles, Equipped with Anti-lock Brake System (ABS) (Code 470a)



All Model 208 Vehicles, Equipped with Anti-lock Brake System (ABS) (Code 470a)



ABS Return Flow Pump Runs Without Control



If you receive customer reports in the above model vehicles of the Anti-Lock Brake System (ABS) return flow pump running without control with



corresponding fault code C1401, clean and insulate the connector for the return flow pump relay. Refer to WIS document GF42.30-P-0003-09B.



Note:



Due to standardization of the ABS wire harness for both the Bosch and ITT systems, the plug for the return flow pump is not assigned on ITT



systems. As such, oxidation can occur within the plug causing the return flow pump in the ABS hydraulic unit to start.

No comments:

Post a Comment