or go to http://www.safercar.gov.2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Technical Service Bulletin # 10-061A Date: 100629
Lighting - Xenon Headlamp Service Info.
Classification: EL10-021A
Reference: NTB10-061A
Date: June 29, 2010
XENON HEAD LAMP SERVICE
This bulletin has been amended. The Parts Information has been updated. Please discard previous versions of this bulletin.
APPLIED VEHICLES: 2005 - 2010 Nissan with xenon headlamps
IF YOU CONFIRM
A xenon headlamp is not functioning because of an issue inside the headlamp assembly (an internal issue),
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 405
ACTION
Refer to the appropriate Service Manual, follow the diagnostic and repair information for xenon headlamps.
NOTE:
^ In most cases, replacement of a bulb or HID control unit will solve the incident.
^ Do not replace the entire xenon headlamp assembly when a bulb or HID control unit is available to solve the incident, if one should occur.
CLAIMS INFORMATION
^ Reference the current Nissan Flat Rate Manual and use the appropriate claims coding for the repair performed.
^ For HID control unit replacement, use Operation Code RJ36AA.
PARTS INFORMATION
NOTE:
^ The HID control unit includes a starter (xenon bulb socket). For some models, the starter is not replaceable. In this case, replace only the HID
control unit using the old starter.
^ Torque specification for the screw that holds the starter to the HID control unit is:
2010 Nissan-Datsun Altima L4-2.5L (QR25DE) Hybrid Page 406
^ 1.3 - 1.7 Nm (0.13 - 0.17 k-gm, 12 - 15 in-lb)
No comments:
Post a Comment