1.1.3.4.1.8. Steering column module
Warning!Communication with ECU required.
2. Chassis CAN bus
Warning!Communication with ECU required.
3. CAN communication is faulty.
Test 3.1: Check the CAN communication with control unit N80 (Steering column module).
3.1. Check the CAN communication with control unit N80 (Steering column module).
Test 3.1.1: Check the CAN communication with control unit.
3.1.1. Check the CAN communication with control unit.
Warning!Communication with ECU required.
E1385
This fault can be ignored and erased.
Possible cause:
- This fault can be ignored and erased.
Affected functions:
- Engine start-stop function
-------------------------------------------------
Test 1: This fault can be ignored and erased.
1. This fault can be ignored and erased.
Note:This fault can be ignored and erased.
Part 1
One or more signals sent from control unit N51/2 (ABC control module) via the CAN bus is implausible.
Possible cause:
- Drive train CAN bus
Affected functions:
- CAN Communication
-------------------------------------------------
Test 1: Engine compartment CAN test
1. Engine compartment CAN test
Test 1.1: Engine compartment CAN test
1.1. Engine compartment CAN test
Test 1.1.1: Procedure in case of CAN faults
Test 1.1.2: Read current CAN configuration and CAN fault codes
Test 1.1.3: Further CAN test options
No comments:
Post a Comment