Mercedes Benz C 43 AMG Technical Service Bulletin # S-91_40-31A Date: 000601

Mercedes Benz C 43 AMG Technical Service Bulletin # S-91_40-31A Date: 000601

Seat Belt - Extensions

296

Date: June, 2000

Order No.: S-SI-91.40/31A

Supersedes: S-SI-MBNA-91/31 (June 1998)

Group: 91

SUBJECT:

ALL MODELS

EXTENDED LENGTH SEAT BELT ORDER REQUEST

The purpose of this bulletin and form is to advise you of an ordering process for extended length seat belts for passenger cars which are not available

through normal parts ordering procedures and must be special ordered from OCAG. Extended length belts are offered to clients only where the

original equipment belt is too short to allow them to safely buckle-up. The extended length seat belt offered is 300 mm longer than the standard seat

belt.

Please fill out the form and have the client read the form and sign it. A copy of the signed form must be provided to the client. The completed and

signed form must be faxed to the Environmental & Safety Engineering department at 201-573-6708.

Processing and order fulfillment will be handled by the parts department. Open order inquires should be directed to the Retailer Parts Services

department and not Environmental & Safety Engineering.

NOTE:

Before submitting your request to Environmental & Safety Engineering for extended length seat belts, please refer to the parts microfiche. Only

use this form for extended length seat belts which are not available through normal spare parts ordering procedures.

Operation Install extended length seat belt