Skip to main content

In Case of WarrantyMercedes Benz C 43 AMG Technical Service Bulletin # S-00_00-072 Date: 010501

In Case of WarrantyMercedes Benz C 43 AMG Technical Service Bulletin # S-00_00-072 Date: 010501



Emission/VIN Label - Availability



Date: May 2001



Order No.: S-SI-00.00/72



Group: 00



SUBJECT:



ALL MODELS



REPLACEMENT EMISSION CONTROL LABELS AND VIN TAGS FOR VEHICLES



Emission Control Labels



Please be advised that it is not possible to order replacement Emission Control Information Labels and or Emission Control Vacuum Diagram Labels



for any Mercedes-Benz vehicle. These labels are only required at time of import, point of first sale and in some state inspection maintenance



programs. The part numbers are not available and will not show up in the system.



In the event that customers do require a replacement label, because it is missing or was damaged in an accident, for example; a request must be made



to the Mercedes-Benz USA Customer Assistance Center (1-800-FOR-MERCedes). In place of a label, a letter, containing a statement of conformity



to applicable Emission Standards, will be provided.



VIN Labels



VIN labels / tags are also not available unless there is an error in the original tag. If this is the case, requests are to be made from dealers to Service



Parts Operations Managers (SPOM's) for a replacement. An SPOM will be dispatched for VIN verification and also to supervise the replacement



and disposal of the incorrect tag.



All questions regarding these topics can be directed to the Customer Assistance Center at 1-800-FOR-MERCedes.

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...