YES
The measurement value is OK.Possible cause of fault
- The conductors in the electrohydraulic control unit are interrupted.
- Component Y3/8n4 (Fully integrated transmission control (VGS) control unit) is defective.
Possible remedy
- Replace component Y3/8 (Electric control unit (VGS)).
Following the repair measures, the following checks MUST be carried out using the Diagnosis Assistance System, menu 'Initial startup'
- Initial startup with manual settings input for new control unit
End of test
NO
Test 1.3.2.1.10.1: The measurement value is not OK.
Test 1.3.2.1.10.2: Possible cause and remedy
Test 1.3.2.1.10.3: Test regulator and generator.
No comments:
Post a Comment