Skip to main content

We Finally Know The Porsche Taycan's Technical Specifications

And they closely match the original Mission E Concept.

Porsche recently confirmed its first ever purely electric car, previously known as the Mission E, will be called the Taycan, but its technical specifications remained a mystery – until now.

Porsche has released technical specs for the production car due to go on sale in 2019, and the good news is they closely match the specs of the original Mission E concept from 2015. The Taycan will use two permanently synchronous motors like those found in the Le Mans-winning 919 Hybrid, with one for the front axle and the other driving the rear wheels, producing a combined output of over 600 horsepower.

These two electric motors generate a permanent rotary motion that can be applied at any time without needing to be started. “We opted for a permanently excited synchronous motor in the Taycan,” said Heiko Mayer, drive unit project leader. “They combine a high energy density with strong sustained performance and maximum efficiency.” High-voltage lithium-ion batteries will provide a range of over 310 miles, though which testing cycle the range it's based on hasn’t been specified.

According to Porsche, once the battery is depleted it will take around 15 minutes to give the car enough juice to cover 248 miles thanks to the Taycan’s fast-charging capabilities that take advantage of 800-volt chargers. In Europe and the US, the Taycan will comply with the Combined Charging System, while in Japan and China Porsche will offer the local standards.

Being a Porsche, the Taycan will deliver a level of performance that is synonymous with the brand. Porsche claims 0-62 mph will take “well under” three and a half seconds, while 124 mph will take less than 12 seconds from a standstill. As for production, Porsche estimates it will ship around 20,000 units per year, which is roughly two-thirds of the current sales figures for the 911.

Porsche also revealed around 40 specialists have built “three figures” worth of prototypes. 21 of these camouflaged prototypes were shipped to the western part of South Africa where more than 60 developers racked up around 24,854 miles. Porsche says that figure will increase to “millions of kilometers” by the time testing has finished, ensuring Porsche’s first ever electric sports car will“run like clockwork in even the toughest conditions.”

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...