- Ignition ON: >3.5 V
- Operate engine at idling speed.(Vacuum> 500 mbar):< 2 V
Question
- Are the measurement values OK?
YES
The measurement values are OK.End of test
NO
The measurement values are not OK.Possible cause and remedy
- Lines to component B28 (Pressure sensor)
- B28 (Pressure sensor)
Further possible causes of fault
- Vacuum line
End of test
1913
B28 (Pressure sensor) : Implausible value (P0106)
Possible cause:
- B28 (Pressure sensor)
Affected functions:
- Engine diagnosis
- Engine output
-------------------------------------------------
Test 1: Check component B28 (Pressure sensor).
1. Check component B28 (Pressure sensor).
Test 1.1: Check component B28 (Pressure sensor) using actual value.
Test 1.2: Check power supply of component B28 (Pressure sensor).
Test 1.3: Test signal voltage of component B28 (Pressure sensor).
No comments:
Post a Comment