YES
The actual value is okay.Further possible causes of fault
- Unmetered air
- Signal wire
- B2/5 (Hot film mass air flow sensor)
End of test
NO
The measurement value is not OK.Possible cause and remedy
- N10/1f43 (Fuse 43)
- Cable for voltage supply
End of test
2185
The idle speed with warm engine is above the permissible range limit. (P1999)
Possible cause:
- Inspect the intake system of the engine for leaks.
Affected functions:
- Engine output
-------------------------------------------------
Test 1: Inspect the intake system of the engine for leaks.
1. Inspect the intake system of the engine for leaks.
Possible cause of fault
- Unmetered air
Possible remedy
- Check entire air intake system for unmetered air.
No comments:
Post a Comment